Installation Guide
23
3
Basic WiNG Express Access Point Configuration
For a WiNG Express SKU (AP6522E), both the WiNG Express UI and an
over the air
(OTA) provisioning configuration
are required for a basic setup and network connection. For a non WiNG Express SKU (AP6522), there’s no OTA
support, and the Access Point utilizes just the UI for its basic setup.
To provide the Access Point a basic configuration and access WiNG Express management functions:
1.
Power up the Access Point.
The Access Point can be powered using an appropriately rated power adapter, POE injector or POE switch
resource.
2.
Connect to the Access Point.
For WiNG Express models
:
Connect to the WiNG Express SSID. For Windows systems, locate the SSID by selecting the network icon
on the bottom right corner of the screen. For MAC systems, locate the SSID by selecting the network icon
on the top right corner of the screen.
Open a browser (Chrome, Firefox or Internet Explorer) and enter
http://express.motorolasolutions.com.
The login screen displays.
For non-WiNG Express models:
Refer to the bottom of the Access Point to obtain the numeric IP address used for connecting to the device.
Point the Web browser to the Access Point’s IP address. The login screen displays.
NOTE
For information on using WiNG Express beyond this initial setup, refer to
the
Motorola Solutions
WiNG Express Users Guide
to familiarize yourself
with the WiNG Express Access Point operating system. The guide is
available at
https://portal.motorolasolutions.com/Support/US-EN
.
