Advanced Features
English
46
Triggering Emergency
When you have not clear the Man Down condition and the Post-
Alert Timer comes to an end, Emergency Alarm or call is
triggered. Your radio sends emergency message to units within
the same Talkgroup. Your radio also sends ID number and GPS
coordinates to your dispatcher if these features are enabled.
See
on page 40 for details regarding
exiting Emergency mode.
Note:
At this point the Man Down features is complete. Use
normal Emergency procedures to cancel Emergency
transmissions.
Alerting User When Man Down Enhanced is
Triggered
Note:
This feature is to be preprogrammed specifically to a
zone and channel which supports Emergency feature.
The volume and repetition duration of Man Down
Enhanced alert tone could be customized and
preprogrammed to suite the required situation.
Consult your agent or qualified technician for more
details.
When the radio initiates Man Down Enhanced, you hear the
Critical Man Down Continuous
alert tone from the radio
speaker. The volume of this tone is preprogrammed to a
minimum level or to the current radio speaker level. Whichever
louder is applied. This can act as a beacon to find the radio.
Note:
If the radio is programmed with Silent Emergency, the
radio inhibits the alert tone and visual alert associated
with the emergency feature.
If the radio is programmed in Surveillance Mode, the
alert tone can be heard from the radio speaker.
Once the alert tone is active, changing to another channel with
different setup triggers different response from the radio.
•
To a channel without Emergency feature
–
The alert tone
is inhibited.
•
To a channel with Emergency but no Man Down feature
–
The alert tone is inhibited.
•
To a channel with Emergency and different Man Down
configuration
–
The current alert tone is inhibited and
replaced with a different alert tone.
•
To a channel with Emergency and similar Man Down
configuration
–
The alert tone continues.
APX_3000_M1.book Page 46 Thursday, November 7, 2013 4:48 PM
