38
Registration
2.
Register Handset
is highlighted. Press
Select
.
3.
Bases are displayed. If necessary, scroll
U
or
D
to a
new base you wish to register the CD1 handset to and
press
Select
.
4.
Enter the System PIN and press
OK
. (default setting =
0000)
5.
The display shows
Searching Base X
(where
X
is the
chosen base number). When registration is complete,
the display shows
Handset registered
.
The handset is automatically assigned the next
available handset number.
NOTE
If registration is not successful the first time, please repeat
the process again in case the base registration period ran
out of time.
If there are already 5 handsets registered to the base,
registration will fail. You must de-register a handset before
you can register a new one.
10.2
To select a base
You can register the CD1 handset with up to 4 bases. Once
registered, you can switch between bases, for example,
bases at home and at work.
1.
Press
Menu
, scroll
D
to
Registration
and press
Select
.
2.
Scroll
D
to
Select Base
and press
Select
.
3.
All the base numbers are displayed.
(In use)
is shown beside the base number where the
handset was previously registered to. Scroll
U
or
D
to
the base you want and press
Select
.
4.
The display shows
Searching Base X…
. When registration is
complete, the handset returns to standby mode.
10.3
To de-register a handset
Use one handset to de-register another. You cannot de-
register the handset that you are using.
1.
Press
Menu
, scroll
D
to
Registration
and press
Select
.
2.
Scroll
D
to
De-register
and press
Select
.
3.
Enter the System PIN and press
OK
. (default setting =
0000)
4.
Scroll
U
or
D
to the handset you want to de-register
and press
Select
.
5.
Press
Yes
to confirm or
No
to cancel.
6.
Press
O
to return to standby mode.
Motorola_CD1_IFU_EN_UK.book Page 38 Wednesday, December 22, 2010 3:40 PM
