Pr
og
ramming F
eatur
es
24
Programming a Channel
Each channel has its own Frequency, Interference Eliminator Code, Scramble Code,
and Bandwidth Settings.
Program each channel separately.
1. Select the channel that you will be programming.
2. The channel number flashes.
l
and code displays
alternately.
3. Press
[
or
]
to select the desired channel.
4. Press and hold
M
to exit
k
, or press
\
to continue.
Programming the Frequency
Sets the frequency that your radio will use. As you are matching your
CP100 radio to existing SP21 radios, enter Programming Mode as
necessary, refer to page 23.
1. Press
\
to display
l
. The frequency flashes.
2. Press
[
or
]
to select the desired frequency (See “Frequency
and Code Charts” beginning on page 37).
3. Press and hold
M
to exit
k
, or press
\
to continue.
6
operation.fm Page 24 Thursday, June 5, 2003 2:25 PM
Summary of Contents for CP100
