1-1
1
1
Hardware Preparation and
Installation
Description
The CPIP5430 is a high performance, hot swappable peripheral slot board.
It complies with PICMG 2.1, 2.9, and 2.16 specifications for 6U single slot
form factor modules. Major features include: Intel Pentium Mobile P4
processor family, Intel 875P chipset with 6300 ESB, up to 4GB PC2100,
dual Gigabit Ethernet interfaces for payload, separate Gigabit Ethernet
interface for management, dual PMC sites, optional 2.5 inch hard drive, up
to two COM ports, and up to three USB ports when used with the Rear
Transition Module (RTM).
The controller features a single Mobile P4 Processor-M with 512KB L2
cache, 400 MHz to 800 MHz Front Side Bus (FSB) speed, and 266 MHz
to 400 MHz DDR via two SODIMM sockets.
The CPIP5430 features both an Intel® 82547 Gigabit Ethernet (GbE)
controller that can be configured for either front panel or rear transition
module access and an Intel® 82546EB dual port Gigabit Ethernet (GbE)
controller. These dual GbE connections are routed to the PICMG 2.16
compliant backplane.
In addition to high computing performance and communication capability,
the CPIP5430 supports Intelligent Platform Management (IPMI) protocols
based on PICMG 2.9 specifications for applications that require high
reliability and serviceability. The CPIP5430 does not interface to the PCI
bus common in CompactPCI backplanes.
