Date / Time Descriptions
http://www.motorola.com/computer/literature
3-9
3
Date / Time Descriptions
BIOS Options Descriptions
System Time
A new time is set by typing in the HOUR, MINUTE, and SECONDS each
followed by pressing < ENTER >. The time is displayed in 24 hour format;
therefore, AM hours range from 0 through 11 and the PM hours range from
12 through 23. Invalid times cannot be entered.
System Date
A new date is set by tying in the MONTH, DAY, and YEAR each followed
by pressing < ENTER >. If one of the parameters is out of range, the new date
will not be entered.
Quick
Allows the BIOS to skip certain tests while booting. This
decreases the amount of time needed to boot the system.
Summary Screen At Boot
When this option is enabled, the system summary information
will be displayed before the system boots.
Boot Failure Retry
Allows BIOS to automatically reattempt to boot if all detected
boot devices fail.
AddOn ROM Display Mode
Selects the display mode used by the BIOS when signing on
option ROMs.
AddOn ROM Display Delay
When this item is enabled, the BIOS will insert a brief pause
after each option ROM signs on. This is useful to allow viewing
any errors or messages that may otherwise be missed
Pause On Post Errors
This option determines whether the POST will pause and wait
for user input when an error occurs.
Prompt During Post
When this option is enabled, the prompt that displays the key
needed to enter SETUP will be displayed during the POST.
