O p e r a t i o n
4 - 3 9
DC P5 01 In s ta ll at io n Man u a l
B A S S :
-
5
d B
T R E B L E :
+
1
0 d B
When DOLBY Pro Logic Surround is selected, the
icon is displayed.
When DOLBY 3 Channel Stereo is selected, the
icon is displayed.
When DTS Surround is selected, the
icon is displayed.
If a DSP sound mode is selected, the
icon turns on and the sound mode is displayed:
S T A D I U M
,
C O N C E R T
,
T H E A T E R
,
A R E N A
,
C L U B
,
C H U R C H
, or
S T E R E O
.
U s i n g t h e D C P 5 0 1 D i g i t a l A u d i o / V i d e o R e c e i v e r
This section describes:
!
How to change the tone setting
!
How to change balance and fade on the DCP501
Changing the DCP501 Tone Setting
Use this feature to define the bass and treble response. The factory setting is
0 d B
. The range
is from –10 dB to +10 dB. To set the tone:
1
Press tone/level to display
BASS
.
2
Press select or ok and the current setting flashes.
3
Press cursor left/right (
<
>
) to set the speaker bass response and press select.
4
Press tone/level twice to display
TREBLE
. Press select and the current setting flashes.
5
Press cursor left/right (
<
>
) to set the speaker treble response and then press
SELECT
or
OK
.
Below are examples of what is displayed on the TV when you adjust the bass and treble
response on the DCP501.
On-screen Display
DCP501 Display
Changing Balance and Fade on the DCP501
You can define the balance between left and right speakers, and between front and rear
speakers with the balance and fade settings. Balance and fade settings should only be used to
perform minor adjustments to the sound playback once the Speaker Test Tone Adjust has been
conducted. This must be performed while sitting at the listening position. Balance/fade
adjustments can reduce the maximum volume of the DCP501.
Balance and fade on the DCP501 are adjusted by attenuating the opposite set of channels. For
example, if you want the balance all the way to the right, the DCP501 and the on-screen display
show
B A L A N C E : L - 2 0
. Balance all the way to the left reads
B A L A N C E : R - 2 0
. The factory
setting is
0 dB
. The range for balance/fade is adjustable by up to
2 0 d B
.
B A S S
-
5
T R B L + 1 0
Summary of Contents for DCP501 - DVD Player / AV Receiver
Page 188: ...486724 001 09 02 MGBI ...
