Diagnostics 4-37
DCT6200\DCT6208 Installation Manual
d13 PVR Status
This diagnostic indicates the status of the DVR resident in the DCT*.
Table 4-36
PVR STATUS - OSD
PVR STATUS
PVR ENABLED:
TRUE
STREAM INDEXER VERSION:
131
CONTENT RECORD VERSION:
2
ENCODER #
ENCODER TYPE
RECORD QUALITY
1 MPEG2
HIGH2
DISK DRIVE
RECORD CAPACITY REMAINING
IDE0
xxxxxxxxxxxxxxxxxxxx
PVR ENABLED
This diagnostic indicates if the DVR is enabled (TRUE) or disabled (FALSE), based on the
DCT*s configuration (connect/disconnect state) and resource availability (resource authorized;
hard disk installed and functional).
The LED displays
En
for enabled or
Un
for disabled.
STREAM INDEXER VERSION
This diagnostic indicates the stream indexer version number. The value is displayed without
leading zeros; for example, version number 0000000065 is displayed
65
.
CONTENT RECORD VERSION
This diagnostic indicates the content record version number. The value is displayed without
leading zeros; for example, version number 0000000001 is displayed
1
.
Encoder Information Table
The Encoder Information Table includes the encoder number, type, and record quality for each
analog encoder. The analog encoder is necessary for transmitting content to the IEEE 1394
output and to record analog content.
If the encoder is not enabled or configured,
NOT AVAILABLE
is displayed in the Encoder
Information Table.
ENCODER NUMBER
Currently, only one encoder is supported. The value displayed in this diagnostic is
1
.
