Figure 1: PDA and PC – Connected
For Windows XP, the ActiveSync application starts.
For Windows Vista, Windows 7, Windows 8, or Windows 10, the Windows Mobile Device Center
starts.
If ActiveSync or Windows Mobile Device Center does not start, ensure that the PDA is set to the
USB OTG
Setting the PDA to the USB OTG Mode on page 43
. If ActiveSync or
Windows Mobile Device Center still does not start, launch the application manually from your
PC.
For Windows 10, if the
Device is not connected
message appears, set up the PDA for
connection with a Windows 10 PC. See
Setting Up the PDA for Connection with a Windows 10
.
4
Insert the CD provided by Motorola Solutions and run the
Setup.exe
file to start the KVL
Software Installation Wizard.
The
End User License Agreement
screen appears.
5
Click
Accept
and follow instructions on the consecutive screens.
During the installation, the PDA may restart several times. If the PDA is password protected, you
need to enter the password and tap
Unlock
after each restart.
IMPORTANT:
If a prompt to disconnect and reconnect the USB Programming Cable
appears, disconnect and reconnect the USB Programming Cable, and click
OK
. If the
PDA is password protected, enter the password and tap
Unlock
.
6
When the installation is completed, exit the KVL Software Installation Wizard.
7
Disconnect the USB Programming Cable from the PDA.
8
Connect the Security Adapter to the PDA.
If the Security Adapter is not detected automatically, ensure that the PDA is set to the
USB OTG
mode. See
Setting the PDA to the USB OTG Mode on page 43
9
If you wanted to upgrade/reinstall the KVL application, the procedure is complete. To upgrade
the Security Adapter software, go to
Upgrading the Security Adapter on page 37
.
MN000397A01-B
Chapter 1: Performing Upgrades
36
Summary of Contents for Dimetra KVL 4000 Air
