A - 98
DSP96002 USER’S MANUAL
MOTOROLA
FBcc
Floating-Point Branch Conditionally
FBcc
Description:
If the specified floating-point condition is true, the address of the instruction immediately following the FB-
Scc instruction and the status register are pushed onto the stack. Program execution then continues at
location PC+displacement. The PC contains the address of the next instruction. If the specified condition
is false, the PC is incremented and program execution continues sequentially. The displacement is a 2’s
complement 32-bit integer that represents the relative distance from the current PC to the destination PC.
Short Displacement, Long Displacement and Address Register PC Relative addressing modes may be
used. The Short Displacement 15-bit data is sign extended to form the PC relative displacement. See
Section A.10 for restrictions. Non-aware floating-point conditions set the SIOP flag in the IER register and
the UNCC bit in the ER register if the NAN bit is set.
"cc" may specify the following conditions:
Non-aware
Mnemonic
Condition
Set UNCC*
EQ
- equal
Z = 1
No
ERR
- error
UNCC v SNAN v OPERR v No
OVF v UNF v DZ = 1
GE
- greater than or equal
NAN v (N & ~Z) = 0
Yes
GL
- greater or less than
NAN v Z = 0
Yes
GLE
- greater, less or equal
NAN = 0
Yes
GT
- greater than
NAN v Z v N = 0
Yes
INF
- infinity
I = 1
Yes
LE
- less than or equal
NAN v ~(N v Z) = 0
Yes
LT
- less than
NAN v Z v ~N = 0
Yes
MI
- minus
N = 1
No
NE(Q) - not equal
Z = 0
No
NGE
- not(greater than or equal)
NAN v (N & ~Z) = 1
Yes
NGL
- not(greater or less than)
NAN v Z = 1
Yes
NGLE - not(greater, less or equal) NAN = 1
Yes
NGT
- not greater than
NAN v Z v N = 1
Yes
NINF
- not infinity
I = 0
Yes
NLE
- not(less than or equal)
NAN v ~(N v Z) = 1
Yes
NLT
- not less than
NAN v Z v ~N = 1
Yes
OR
- ordered
NAN = 0
No
PL
- plus
N = 0
No
UN
- unordered
NAN = 1
No
Note: The operands for the ERR condition are taken from the ER register.
See the description of UNcc in Section A.4.
CCR Condition Codes: Not affected.
Assembler Syntax:
FBcc label (short)
FBcc label
FBcc Rn
Operation:
If cc, then PC+xx
→
PC
else PC+1
→
PC
If cc, then PC+xxxx
→
PC
else PC+1
→
PC
If cc, then PC+Rn
→
PC
else PC+1
→
PC
Summary of Contents for DSP96002
