14
Getting Started
2.
During power ON, when the adapter is plugged in, the battery icon on
screen's top right corner will show that the battery is charging. The Blue
LED at the top left corner lights up to indicate that the adapter is plugged
in.
2.4
Outdoor Camera Unit Installation
IMPORTANT
• This product is not intended for submersion in water. For outdoor use, mount
it in a sheltered place where it is not directly exposed to rain or snow.
• Determine a location for the Camera Unit that will provide the best
• view of the surrounding environment and activities you wish to monitor.
• Select a location for the camera that has an ambient temperature between
14°F~122°F (-10°C~50°C).
• Avoid installing the camera where there are thick walls or obstructions
between the camera and the monitor unit.
• Avoid installing in a location which requires the wireless signal to pass
through cement, concrete, and metal structures. This will reduce the range
of transmission.
• Carefully plan where and how the Camera Unit will be positioned and where
you will route the cable that connects the Camera Unit to the power adapter.
• Aim the camera(s) to best optimize the viewing area: select a location for the
camera that provides a clear view of the area you want to monitor, that is free
from dust, and that is not in line-of-sight to a strong light source or direct
sunlight.
• Before starting permanent installation, verify the Camera Unit's performance
by observing the image on a monitor when the Camera Unit is positioned in
the same location/position where it will be permanently installed.
• Avoid letting power cords rub against any sharp edges or lie across any high
traffic areas where people might trip over them.
