18
Using the Digital Video Monitor
3. Using the Digital Video Monitor
3.1
Setting up
• Place the Indoor Camera Unit in a convenient location (e.g. on a table) and
point the camera lens towards the area you want to monitor.
• Mount the Outdoor Camera Unit on the wall under the shelter
(recommended) and point the camera lens towards the area you want to
monitor.
• Adjust the Indoor Camera Unit's head angle by rotating the camera up, down, left
and right until you are satisfied with the image in the Monitor unit.
NOTE
Do not place the Indoor Camera Unit within reach of a child or pet(s)! If there is
interference with the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.2
Pan and Tilt
The camera can be remotely controlled from the Monitor unit.
1.
Press the
+
UP button or
-
DOWN button to tilt upward or downward.
2.
Press the
<
LEFT button or
>
RIGHT button to pan left or right.
NOTE
You can press the
Quick Scan button to double the pan and tilt speed for
quick search. Toggle the button again for returning to normal speed.
3.3
Night Vision Mode
The Indoor Camera Unit has 8 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor detects a low level of ambient
light, the LEDs will automatically activate and the screen on the Monitor unit will
display in black and white. The icon will be displayed on the screen.
3.4
Talk Mode (For Indoor Camera Unit only)
Press and hold the
T
TALK button on the Talk button to speak through the
Indoor Camera Unit's the Indoor Camera Unit's loudspeaker. The
T
icon will be
displayed at the top of the LCD screen.