25
ENGLISH
Help
Setting Up
While I am adding a
new Camera to my
account, I am not able
to find any Cameras to
add.
If you are trying to add a Camera
which has previously been added
into your account or another
account, you will first have to reset
the Camera. This can be done by
pressing and holding the PAIR button
at the bottom of the Camera for 5
seconds.
General
What are the
supported browsers
for accessing from my
PC/ Mac?
We recommend using Google
Chrome 24 or above. However
the following browsers are also
supported: Internet Explorer 9.0 or
above (for PC), Safari 6.0 or above (for
Mac) or Firefox 18.0 or above (both
PC or Mac).
General
What is the
significance of LED
flashing?
A flashing LED indicates the following
status:
Slow flashing: 1. Your Camera is in
setup mode. You can add the Camera
to your account in this mode. Out of
the box, the Camera is in Setup mode.
To reset to Setup mode, press and
hold the PAIR button on the bottom of
the Camera untill you hear a beep.
Slow flashing: 2. The Camera is either
connecting to the router or has lost
the link to the router. Please ensure
that the Camera is in the Wi-Fi®
signal range.
LED is stable: The Camera is
connected to the Wi-Fi® network.