Getting Started
FR6800 User Guide
16
•
Single Slot USB/Serial Cradle
•
Vehicle Cradle.
To charge the main battery:
1.
Connect the charging accessory to the appropriate power source.
2.
Insert the FR6876 into a cradle or attach to a cable. The FR6876 begins charging. The Charging/Battery
Status LED blinks amber while charging, then turns solid green when fully charged. See
Table 1-2
for
charging indications.
The
1950 mAh
battery fully charges in approximately five hours and the
3600 mAh
battery charges in
approximately seven hours.
Table 1-2
LED Charge Indicators
Charging/Battery
Status LED
Indication
Off
FR6876 is not charging.
FR6876 is not inserted correctly in the cradle or connected to a power
source. Charger/cradle is not powered.
Slow Blinking Amber
(1 blink every 2 seconds)
FR6876 is charging.
Solid Green
Charging complete.
Note: When the battery is initially inserted in the FR6876, the amber LED
flashes once if the battery power is low or the battery is not fully inserted.
Fast Blinking Red
(2 blinks/second)
Charging error, e.g.:
•
Temperature is too low or too high.
•
Charging has gone on too long without completion (typically eight hours).