background image

 

2

 

General Information

 

English

 

General Information/Radio Controls

 

General Information

 

This user guide covers the operation of the 
GM1200E Mobile Radio used on MPT1327 Trunked 
Radio Systems. Please note that the location of the 
system may affect the types of call which are 
available. The radio display prompts are available in 
various languages. Please consult your dealer for 
further information.

 

WARNING: When installing or removing the

mobile radio from the vehicle it
must be switched off.

 

Radio Controls

 

Numbers refer to the illustrations on inside covers.

 

1.

 

Radio ON/OFF

 

.

 

2.

Microphone connector

 

.

When installing the microphone, turn the radio off 
and on again.

 

3.

Volume Up/Down Control

 

.

 

4.

LED Indicators

 

:

Red:

On when radio is transmitting

Green:

Flashes to indicate NO SERVICE.

 

5.

External Alarm Button

 

.

Switches external alarm feature On/Off.

 

6.

Base Call Button

 

.

For making calls to a commonly used, pre-
programmed number.

 

7.

LCD Display

 

 

8.

Up/Down Scroll Buttons

 

.

 

 

 

Shortform Dial/Call in Absence/SDM Selector
or
Channel Selector (conventional mode).

 

9.

Menu Button

 

.

 

10. Clear/Edit

 

or

 

 

Monitor Button 

 

(conventional mode).

 

11. Numeric Keypad

 

.

0 - 9  - for entering digits/selecting dedicated calls.

 - for sending a call.

- call modifier for priority, broadcast, 
emergency and status calls.

 

12. Volume Level Indicators

 

.

 

13. Left/Right Scroll Buttons

 

.

Used to view data message text in the SDM stack.
Left = scroll up SDM, Right = scroll down SDM

 

14. Personality Selection Button

 

.

 

15. Status Button 

 

for initiating a status call request.

 

16. Data Button 

 

for interrogating the data message 

stack or initiating a short data call request.

 

17. Call in Absence Button 

 

for interrogating the call 

in absence stack.

 

18. Microphone PTT (Push To Talk)

 

.

#

Summary of Contents for GM1200E























Reviews: