Battery Charge LED
(see figure below)
•
No light - Not in use
•
Red light - Battery charging (8 hours for full
capacity)
•
Green light - Battery fully charged
Important Note
Battery is considered damaged when charging takes
more than 8 hours. Contact service to replace battery.
Data Communication With Host
(see figure above)
Communication between the HDT 401 and the host
computer can be established when the HDT 401 rests
in the Office Dock. When data flows from the
HDT 401 to the host computer, the
Data Out
yellow
LED lights.
When data flows from the host computer to the
HDT 401, the
Data In
yellow LED lights.
Approved Accessories
•
FNN6001B: Battery – Lithium Ion 3.6V
1450mAH.
•
FLN9202A: Belt Holster – full size with pocket.
•
FLN9623A: Belt Holster – slipper.
•
FLN9438A: Stylus pen.
•
FKN4886A: Serial cable (1m) standard EIA
RS232 DB9.
•
FKN4871A: Serial cable (1m) coiled for Camero
printer DIN8.
•
FKN4792A: Serial cable (20cm) DB25 with
negative supply pin.
•
FKN4793A: Serial cable (1m) DB25 with power
pins.
HDT 401
Hand-held Data Terminal
with Local Area Network Radio Modem
And LASER Barcode Scanner
Quick Reference Card
Switching On
Press the Power On/Off button for more than 2
seconds. The Power Indication Light will illuminate,
indicating that the battery is O.K. and the device is
operative.
Switching Off
Press the Power On/Off button for more than 2
seconds and release. The Power Indication Light will
turn off.
HDT 401 Holster
Office Dock
Power On/Off
Button
Keypad
Screen
Buzzer
Battery Pack
(
Do not remove)
Indication Light
Laser Scanner
Infrared
communication
Aperture
!
C a u t i o n
CAUTION
To avoid possible eye injury, do not stare
directly at the laser beam of the scanner.
Important Care Instructions:
Use a soft damp cloth to clean the
infrared communication aperture and laser window.
