116
My Info
4 Enter the name you want to appear. See
“Entering Text” on page 45. When you are
finished, press
O
.
You can also edit the information in Line 1, Line 2,
and Circuit Data, but your changes are only
temporary. The next time your phone registers on
the network, your actual phone numbers and circuit
data number appear again in My Info.
Setting Sending Options
Your phone can send information in My Info to
other phones that have this capability.
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Direct Connect call or only when you
choose to send it.
Information Sent
The information your phone sends always includes
My Name and Direct Connect.
Line 1, Line 2, Carrier IP, and Circuit Data may
also be sent, depending on how you set your
sending options.
The default setting is Line 1 only.
To change which fields are sent:
1 From the main menu, select My Info.
2 Press
m
.
3 Select Direct Send Setup > Info to Send.
4 A checkmark appears next to the fields that will
be sent. To add or remove the checkmark, select
the field.
5 When you are finished, press
A
under Done.
Automatic Sending
To control whether your information is sent
automatically:
1 From the main menu, select My Info.
2 Press
m
.
3 Select Direct Send Setup > Auto Send.
4 To set your information to be sent automatically,
set this option to On. -or-
To set your information to be sent only when you
choose to send it, set this option to Off.
Note: When you receive your phone, it is set to
send your information automatically.
