Motorola KVL 4000 User Manual Download

Page: 149 / 236

5.2 Viewing Keys in Target Devices

Connect the target device to the KVL using an appropriate key load cable. (See

1.4.4.1 Connecting the KVL

to a Radio or Another Target Device, page 1-13

Step result:

A tone is played and a list of available options appears.

Figure 5-12

Configure a Radio Screen – Viewing Keys

Select

CKR keys

Step result:

The list of all available CKR keys appears.

The list is read-only.

Three sort methods are allowed:

• By the CKR ID (default)

• By the Key ID

• By the Key type

Switch between sort methods by tapping the

Sort

button. It cycles through the sort methods from 1

to 3, then back to 1.

When you have finished viewing the keys, tap

Done

on the consecutive screens to return to the KVL main screen.

6871018P37-F - January 2013

5-13

Summary of Contents for KVL 4000












































































































































































































































Search results

Summary of Contents for KVL 4000

Reviews:

Related manuals for KVL 4000

Brands by name

Popular brands

Motorola KVL 4000, User Manual

Search results

Summary of Contents for KVL 4000

Reviews:

Related manuals for KVL 4000

Brands by name

Popular brands