Chapter 11
Maintenance and Troubleshooting
This chapter includes instructions on cleaning and storing the device, and provides troubleshooting
solutions for potential problems during device operation.
11.1
Maintaining the LEX Series Device
For trouble-free service, observe the following tips when using the LEX L10g:
•
Do not scratch or use a pen or a pencil or other sharp object on the surface of the screen.
•
The touch-sensitive screen is made of polycarbonate. Do not to drop or subject the device to strong
impact.
•
Protect from extreme temperatures. Do not leave device on the dashboard of a car on a hot day,
and keep it away from heat sources.
•
Do not store in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the device. If the surface of the screen becomes soiled, clean it with a
soft cloth moistened with isopropyl alcohol.
•
Periodically replace the rechargeable battery to ensure maximum battery life and product
performance. Battery life depends on individual usage patterns.
11.2
Battery Safety Guidelines
Adhere to the following guidelines for battery safety:
•
The area where the units are charged should be clear of debris and combustible materials or
chemicals.
•
Follow battery usage, storage, and charging guidelines found in this guide.
•
Improper battery use may result in a fire, explosion, or other hazard.
•
To charge the battery, the battery and charger temperatures must be b32 ºF and +113 ºF
(0 ºC and +45 ºC)
•
Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the
compatibility of a battery or a charger, contact Motorola Solution support.
•
If charging through a USB port, the device shall only be connected to products that bear the USB-IF
logo or have completed the USB-IF compliance program.
•
To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all
batteries will carry a Motorola hologram. Do not fit any battery without checking it has the Motorola
authentication hologram.
•
Do not disassemble or open, crush, bend or deform, puncture, or shred.
•
Severe impact from dropping any battery-operated device on a hard surface could cause the battery
to overheat.
•
Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or
expose to water or other liquids, or expose to fire, explosion, or other hazard.
MN002858A01-A
Maintenance and Troubleshooting
161
Summary of Contents for LEX L10g
