background image

General Information

23

ENGLISH

Altered Products.

 Products or Accessories with (a) serial numbers or date 

tags that have been removed, altered or obliterated; (b) broken seals or 
that show evidence of tampering; (c) mismatched board serial numbers; 
or (d) nonconforming or non-Motorola branded housings, or parts, are excluded 
from coverage. 

Communication Services. 

Defects, damages, or the failure of Products or 

Accessories due to any communication service or signal you may subscribe to 
or use with the Products or Accessories is excluded from coverage.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

You will receive instructions on how to ship the Products or Accessories at your 
expense and risk, to a BINATONE Authorised Repair Centre.

To obtain service, you must include: (a) the Product or Accessory; (b) the 
original proof of purchase (receipt) which includes the date, place and seller of 
the Product; (c) if a warranty card was included in your box, a completed 
warranty card showing the serial number of the Product; (d) a written 
description of the problem; and, most importantly; (e) your address and 
telephone number.

These terms and conditions constitute the complete warranty agreement 
between you and BINATONE regarding the Products or Accessories purchased 
by you, and supersede any prior agreement or representations, including 
representations made in any literature publications or promotional materials 
issued by BINATONE or representations made by any agent employee or staff 
of BINATONE, that may have been made in connection with the said purchase.

E-mail:  info@dale.com.tr

Tel:  +90 216 336 9674 in Turkey

Summary of Contents for MBP16



























Reviews: