background image

CHAPTER 5 WIRELESS APPLICATIONS

Introduction

Wireless Local Area Networks (LANs) allow mobile computers to communicate wirelessly and send captured 
data to a host device in real time. Before using the MC21XX on a WLAN, the facility must be set up with the 
required hardware to run the wireless LAN and the MC21XX must be configured. Refer to the documentation 
provided with the access points (APs) for instructions on setting up the hardware.

To configure the MC21XX, a set of wireless applications provide the tools to configure and test the wireless 
radio in the MC21XX. Refer to the 

Wireless Fusion Enterprise Mobility Suite User Guide for Version X1.01

 for 

information on configuring wireless profiles. Go to 

http://www.motorola.com/enterprisemobility/manuals

 for the 

latest version of this guide. See 

Software Versions on page x

 to determine the Fusion version on the MC21XX.

Tap the 

Signal Strength

 icon to display the 

Wireless Launcher

 menu.

NOTE

MC2180 only.

NOTE

802.11d is enabled by default. When enabled, the AP must be configured the same in order to 
connect.

Summary of Contents for MC21XX SERIES





















































































































Reviews: