Motorola MC35 EDA User Manual Download

Page: 45 / 236

3 E n t e r i n g I n f o r m a t i o n

Using ActiveSync

Tap

Menu

Add Server Source

In the “Server address” box, enter the name of the Microsoft Exchange server to

which you want to connect.

Select the “This server requires an encrypted (SSL) connection” option if it is
applicable to your corporate network.

Tap

Next

Enter your user name, password, and domain name.

If you intend to enable automatic synchronization, select the “Save password”
option.

Tap

Advanced

Define the rules for resolving conflicts if items change on both your device and on
the server.

Tap

Next

Select the check box opposite the types of information that you want to synchronize

with the server.

Define the synchronization settings for each information type by tapping the type of

information, then tap

Settings

Tap

Finish

To set up automatic synchronization with a server:

Tap

> Programs

> ActiveSync

Tap

Menu > Schedule

Perform one or both of the following:

•

Under Peak times, select the “When new items arrive” option.

It is more cost-efficient to synchronize on a regular schedule when mail
volume is high, instead of when new items arrive.

•

Under Off-peak times, select the “When new items arrive” option.

This can be more cost-efficient than synchronizing on a regular schedule when
mail volume is low.

To set the days and hours that makes up your peak and off-peak times, click

Change Times

Tap

NOTE:

Some devices or versions of Microsoft Exchange Server may also require

you to specify a device address to use this feature.

Summary of Contents for MC35 EDA













































































































































































































































Search results

Summary of Contents for MC35 EDA

Reviews:

Related manuals for MC35 EDA

Brands by name

Popular brands

Motorola MC35 EDA, User Manual

Search results

Summary of Contents for MC35 EDA

Reviews:

Related manuals for MC35 EDA

Brands by name

Popular brands