Maintenance & Troubleshooting 9 - 11
Cables
Table 9-6
Troubleshooting the Cables
Symptom
Possible
Cause
Action
MC45 battery is not
charging.
MC45 was
disconnected from
AC power too soon.
Connect the power cable correctly. Confirm main battery is charging
under
Start
>
Settings
>
Power
.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the faulty
battery.
The MC45 is not
fully attached to
power.
Detach and re-attach the power cable to the MC45, ensuring it is
firmly connected.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Cable was
disconnected from
MC45 during
communications.
Re-attach the cable and retransmit.
Incorrect cable
configuration.
See the system administrator.
Communication
software is not
installed or
configured properly.
Perform setup as described in the
MC45 Integrator Guide.
Summary of Contents for MC45
