background image

Using the Phone 4 - 5

Making a Call

With the MC45, you can make a call from the phone dialer, contacts, speed dial and call history.

Using the Phone Keypad

To make a call using the phone keypad:

1.

Tap 

Start

 > 

Phone

 

or press 

.

2.

Enter the phone number on the dialer or keypad. The number appears in the Call Line.

3.

Tap the green Call Line or press 

.

4.

Tap 

 to cancel the call or tap 

 to place the MC45 in speakerphone mode.

5.

When the call connects, the name or number appears in the Call Line. To place the call on hold, press 

To return to the call, press 

 again.

6.

Tap 

 or press 

 to end the call.

Using Contacts

Use Contacts to make a call without looking up or entering the phone number.

To make a call from Contacts:

1.

Tap 

Start

 > 

Contacts

.

2.

From the contact list, tap and hold the contact name.

NOTE

You can make emergency calls even when the MC45 is locked or when a SIM card is not installed. See 

Making an Emergency Call on page 4-7

 for more information.

NOTE

Placing a call on hold using the Call Line can be enabled. To enable, press 

 > 

 > 

Enable Hold

The toggle icon changes to 

On

.

Summary of Contents for MC45





































































































































































Reviews: