5 - 12 MC9190-G Integrator Guide
Figure 5-8
Bootloader Screen
8.
Place the MC9190-G into a Single Slot Serial/USB Cradle.
9.
Use the up and down scroll buttons to select
Download from USB
, then press
ENTER
.
10.
The Bootloader displays the following:
Figure 5-9
Waiting for Input
11.
On the
WCE USBDownload
application, locate the hex files to download.
Select required operation
Download from SD card
Download from USB
Exit
CAUTION
To ensure a successful download, do not remove power from the MC9190-G while in Bootloader.
Waiting for input. . .
NOTE
One hex file or multiple hex files can be selected. To select multiple files, press the
Ctrl
key while selecting
files.
If selecting multiple files to download, USBDownload reads the header of the file and identifies the file type. If
the Partition table file is among the files selected, then USBDownload downloads that file first. Similarly,
USBDownload downloads the CPLD file last.
Summary of Contents for MC9190-G
