18
Settin
g
Up
4
Select
FORMAT
to scroll through the formats. Stop at
the format you want to set for the area code, then
scroll down to move to the next area code.
5
Repeat steps 3 and 4 to store up to 4 more area
codes. When you are finished, select
DONE
.
6
Select
EXIT
to return to the standby screen, or
scroll to a different menu option.
Setting the Date and Time
1
Select
MENU
.
2
Scroll to
Date/Time
and select
SELECT
.
3
Enter the time. (two-digits are required for both
hour and minutes, so use a leading 0 for 1-digit
values.)
4
If using a 12-hour clock, select
AM/PM
to switch
between am and pm.
5
Scroll down to move the next field.
6
Select
CHANGE
to change the time format (12 or 24
hour clock). Scroll down to move to the next field.
7
Select
CHANGE
to select date format
(MM/DD or DD/MM).
8
Scroll down to move the next field.
9
Enter the current date. Set the day of the week on
the base unit (only) by pressing
CHANGE
to scroll to
desired listing.
10
Select
DONE
.
11
Select
EXIT
to return to the standby screen, or
scroll to a different menu option.
MD790 Book.book Page 18 Tuesday, February 8, 2005 11:51 AM
UNCONTROLLED
DOCUMENT