background image

 

 

The lightning symbol with an arrow inside the equilateral 
triangle indicates that the user should pay attention to 
“dangerous voltage" un-insulated in the frame, which is 
sufficient to be harmful to humans. 

 

The exclamation mark inside the equilateral triangle indicates 
that there is important operation and service (maintenance) 
instructions in the attached printed documents. 

 

CAUTION

RISK OF ELECTRIC SHOCK

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.

CAUTION:

 

 
Symbols and supplementary warning on the terminal button.  

Note: 

No extension cord, socket, or other lead wire should be used with the plug, to 
avoid electrical shock. The plug should be fully plugged in, with no part exposed. 
 
Never place the device where fluids may drop or splash. Never place any object 
with fluids, such as vases, on the device. 

Alert  

To prevent fire or shock hazard, do not expose this device to rain or 
moisture.  

In line with IS15245: 2002- BIS Rules  

Repair  

Please contact your cable TV operator to have it repaired or replaced, 
if necessary. 

 

The installation shall be performed by qualified service personnel in line with local 
rules and laws.   

 

 

 

 

 

Summary of Contents for MDV850T

























Reviews: