1. Dial the telephone number and press the key. The handset speaker comes on.
Or
2. Press the key and wait until the handset speaker comes on then dial the
telephone number as required.
19
Using the T
elephone
20
Using the T
elephone
3.
Press the key to switch hand-free mode on or off.
Press the key to end the call.
Press the key to end the call.
S w itching during a Call
1.
2.
When an external call is received, all the handsets registered and the base station ring.
Taking Calls
Press the key. Or the key to answer the call.
Press the key to end the call.
Handset is not in the base station
1.
2.
1.
2.
3.
Lift the handset from the base station; a connection is automatically established
(when the AUTO ANS function is active). Otherwise, press the key.
Carry out the conversation.
Press the key to end the call.
Handset is in the base station
1.
2.
Press the
0
key for two seconds.
Supplement the call number and press the key to establish a connection.
Press the key; the first entry in the phone book appears.
Press the or key to select the required subscriber from the phone book.
Alternatively, enter the first letter of the name required.
Press the key. The number is dialed. Carry out the conversation.
1.
2.
3.
Prefix Dialling
Dialing from the Phone Book
When prefix dialling number has been entered, (see Handset Settings page 29) the
prefix number that you set will be dialled out first whenever you make an external call.
The prefix can be a number up to 5 digits. You can use the prefix memory to store an
area code that you frequently use, for example 0207 or 08457, to save you dialling it
each time you make a call.
Note. To store a number in the Phonebook, see 'Store entries' page 25.
Make a handsfree call
In standby mode
