Your Remote Access code allows you to retrieve messages, and record memos and
announcements when you're away from your Answering Machine.
Set remote access code
The remote access code helps prevent unauthorised people from ringing up your
answering machine and listening to your messages. The code can be any 4-digit number,
from to . The pre-set code is 0000.
1. Press until you hear "Remote access code is 0000" and the display shows Ac.
2. Press or to set the first digit between 0-9. Press to confirm.
3. Repeat Step 2 until all 4 digits have been set. The machine announces the new code.
39
Answering Machine Operation
40
Answering Machine Operation
A1:
"Please leave your message after the beep."
A2:
"I am sorry that I am not available. Please call back later."
Recording Announcement A1 (Announce Only set to OFF)
Press until you hear '
A n n o u n c e m e n t O n e '
Press
. Y
ou will hear 'Now Recording' followed by a beep. Speak
toward the Base Unit. You have up to
6 0
seconds for your announcement. Your
announcement must be at least 3 seconds in length.
Press
when finished. Your recording will be played automatically. If you're
not satisfied, record your announcement again.
1.
2.
3.
Recording Announcement A2 (Announce Only set to ON)
Follow the same steps as recording Announcement A1. However, this time you will
hear '
A n n o u n c e m e n t Tw o
' since you have set Announce Only to
O N .
0 0 0 0
9 9 9 9
Play messages in mailbox
Repeat / Play Previous Message
Stop playback or recording
Play Next Message
Delete current message
Record a Memo
Record Announcement
Turn System On /Off
Play Help Menu
IF YOU WANT TO
PRESS
1
4 / Press 4 Twice
5
6
7
8, then 5 to stop
9, then 5 to Stop
0
*
Remote Operation
1. Call your answering machine from any touch-tone phone.
2. When you hear your outgoing announcement, enter your 4-digit Remote Access code. .
3. You can now perform the following functions:
