To Change the Network Name and Password
For the 5 GHz band:
1
Select and delete the old Network Name, then type in the new
Network Name.
2
Click the Save button.
3
You can click the Show Key box to check your typing for Password.
4
Select and delete the old Password, then type in the new Password.
5
Click the Save button.
For the 2.4 GHz band:
6
Select and delete the old Network Name, then type in the new
Network Name.
7
Click the Save button.
8
You can click the Show Key box to check your typing for Password.
9
Select and delete the old Password, then type in the new Password.
10
Click the Save button.
Network
Name
can
be
from
6
‐
32
characters
long.
You
can
use
the
upper
and
lower
case
letters
(a
–
z
and
A
–
Z),
numbers
(0
‐
9)
and
special
characters
(e.g.
$_/&
etc.)
except
the
single
quote
‘
.
Password
can
be
from
8
‐
63
characters
long.
You
can
use
upper
and
lower
case
letters
(a
–
z
and
A
–
Z),
numbers
(0
‐
9)
and
special
characters
(e.g.
$_/&
etc.)
except
the
single
quote
‘
.
Be sure to write down and save the new wireless network names and
passwords in a place where you can easily find it. One approach is to write
them on a small piece of paper and tape it on the bottom of your cable
modem. Some people like to take a picture of the settings with their phone,
which is fine as long as long as they save it in a place where they are sure to
find it when they need it.
Summary of Contents for MG7550
