Connect Your Devices
The ML2410 allows many devices to share your Internet
connection. Devices can connect by using WiFi or by
connecting an Ethernet cable into one of the ML2410 Ethernet
ports.
WiFi Wireless
You can connect any of your WiFi devices by first going into
the WiFi setup section for the device (not the ML2410 router).
Then use the ML2410 router’s WiFi Network Name (SSID) and
WiFi Password/Key. The unique factory-set default settings
are printed on a label on the bottom of the ML2410. If you
prefer to use a different network name and password, the
MotoManage™ app is an easy way for you to change your WiFi
network name or password. For more information on our
MotoManage app see the MotoManage section below.
Wired Ethernet
You can also connect up to two smart TV/media players,
computers, game stations, or other devices with an Ethernet
cable between an Ethernet port of the device and either of the
LAN jacks on the router. Some devices have a Network Setup
section where you specify a wired Ethernet connection. If you
have a problem with a particular device, consult its user
manual.
Once you’ve set up a Wireless or Wired Ethernet connection,
try to browse the Web. If browsing works, Congratulations!
Your ML2410 is working.
If your ML2410 is NOT working, see Troubleshooting Tips and
We like to help at the end of this Quick Start.
