8-24
MPC8260 PowerQUICC II UserÕs Manual
MOTOROLA
Part III. The Hardware Interface
Figure 8-7. Retry Cycle
As a bus master, the MPC8260 recognizes either an early or qualiÞed ARTRY and prevents
the data tenure associated with the retried address tenure. If the data tenure has begun, the
MPC8260 terminates the data tenure immediately even if the burst data has been received.
If the assertion of ARTRY is received up to or on the bus cycle after the Þrst (or only)
assertion of TA for the data tenure, the MPC8260 ignores the Þrst data beat. If it is a read
operation, the MPC8260 does not forward data internally to the cache, execution unit, or
any other MPC8260 internal storage. This address retry case succeeds because the data
tenure is aborted in time, and the entire transaction is rerun. This retry mechanism allows
the memory system to begin operating in parallel with the bus snoopers, provided external
devices do not present data sooner than the bus cycle before all snoop responses can be
determined and asserted on the bus.
Note that the system must ensure that the Þrst (or only) assertion of TA for a data transfer
does not occur sooner than the cycle before the Þrst assertion of ARTRY on the bus, (or
conversely, that ARTRY is never asserted later than the cycle after the Þrst or only assertion
of TA). This guarantees the relationship between TA and ARTRY such that, in case of an
address retry, the data may be cancelled in the chip before it can be forwarded internally to
the internal memory resources (registers or cache). Generally, the memory system must
CLKOUT
BR INT
BG
ADDR + ATTR
BG INT
BR
ABB
TS
AACK
ARTRY
MPC8260
External
MPC8260
External
Summary of Contents for MPC8260 PowerQUICC II
