10-64
MPC8260 PowerQUICC II UserÕs Manual
MOTOROLA
Part III. The Hardware Interface
Note that 60x bus accesses that hit a bank allocated to the local bus are transferred to the
local bus. However, local bus accesses that hit a bank allocated to the 60x bus are ignored.
10.6.1 Requests
An internal or external deviceÕs request for a memory access initiates one of the following
patterns (M
x
MR[OP] = 00):
¥
Read single-beat pattern (RSS)
¥
Read burst cycle pattern (RBS)
¥
Write single-beat pattern (WSS)
¥
Write burst cycle pattern (WBS)
These patterns are described in Section 10.6.1.1, ÒMemory Access Requests.Ó
A UPM refresh timer request pattern initiates a refresh timer pattern (PTS), as described in
Section 10.6.1.2, ÒUPM Refresh Timer Requests.Ó
An exception (caused by a soft reset or the assertion of TEA) occurring while another UPM
pattern is running initiates an exception condition pattern (EXS).
A special pattern in the RAM array is associated with each of these cycle type. Figure 10-56
shows the start addresses of these patterns in the UPM RAM, according to cycle type.
RUN
commands (M
x
MR[OP] = 11), however, can initiate patterns starting at any of the 64 UPM
RAM words.
Figure 10-56. RAM Array Indexing
Write Single-Beat Request
Read Burst Request
Read Single-Beat Request
Write Burst Request
RAM Array
Refresh Timer Request
Exception Condition Request
RSS
RBS
WSS
WBS
PTS
EXS
64 RAM
Words
Array Index
Generator
Summary of Contents for MPC8260 PowerQUICC II
