19-24
MPC8260 PowerQUICC II UserÕs Manual
MOTOROLA
Part IV. Communications Processor Module
The DPLL can also be used to invert the data stream of a transfer. This feature is available
in all encodings, including standard NRZ format. Also, when the transmitter is idling, the
DPLL can either force TXD high or continue encoding the data supplied to it.
The DPLL is used for UART encoding/decoding, which gives the option of selecting the
divide ratio in the UART decoding process (8
´
, 16
´
, or 32
´
). Typically, 16
´
is used.
Note the 1:2 system clock/serial clock ratio does not apply when the DPLL is used to
recover the clock in the 8
´
, 16
´
, or 32
´
modes. Synchronization occurs internally after the
DPLL generates the Rx clock. Therefore, even the fastest DPLL clock generation (the 8
´
option) easily meets the required 1:2 ratio clocking limit.
19.3.6.1 Encoding Data with a DPLL
Each SCC contains a DPLL unit that can be programmed to encode and decode the SCC
data as NRZ, NRZI Mark, NRZI Space, FM0, FM1, Manchester, and Differential
Manchester. Figure 19-15 shows the different encoding methods.
Table 19-8. Preamble Requirements
Decoding Method
Preamble Pattern
Minimum Preamble Length Required
NRZI Mark
All zeros
8-bit
NRZI Space
All ones
8-bit
FM0
All ones
8-bit
FM1
All zeros
8-bit
Manchester
101010...10
8-bit
Differential Manchester
All ones
8-bit
Summary of Contents for MPC8260 PowerQUICC II
