38
Engli
s
h
Speed Dial
Speed dial allows you to dial a shortened number of up to
three
digits instead of the full number. The speed dial number is the
location of an entry in the contact list.
1.
Enter the pre-programmed speed dial number (for example: 5)
and press
.
2.
To place the call, press
.
To hang up, press
.
Private Call
A Private Call, also called Point-to-Point or individual call, is a call
between two individuals. No other terminal can hear the
conversation. This call can be:
• a Duplex call (if the system allows) in TMO, or
• a standard Simplex call in TMO or DMO.
Making a Private Call
1.
From the Home display dial a number.
2.
If Private is not the first type of call presented, press
CType
to
select the Private Call type.
3.
For a
Simplex
call,
press and release the
PTT
button. You will
hear a ringing tone. Wait for the called person to answer your call.
Press and hold
PTT
. Wait for the talk permit tone (if configured)
before talking, and release the
PTT
when listening.
For a
Duplex
call, press and release
. You will hear a ringing
tone. Wait for the called person to answer your call.
4.
To end the call, press
. If the called person ends the call, the
Call Ended
message is displayed.
While Transmit Inhibit is activated, an incoming Private Call is
indicated, but you cannot answer the call.