2-2
Computer Group Literature Center Web Site
Chassis Mount Options
2
Install the Desktop Cover Kit
1. The top and side panels are attached with ball stud pop-on, pop-off
catches. If the ball studs are not already installed on the chassis,
unpack the studs and thread them into place in the holes provided in
the top and sides of the chassis.
2. Install the side panels by positioning the ball stud catches over the
ball studs and pressing firmly inward until the catches engage.
3. Install the top panel by positioning the ball stud catches over the ball
studs and pressing downward until the catches engage.
Be sure the chassis is resting on a strong, level table or desk, in a clean
environment, with plenty of air space above and around the chassis. Refer
to
Chassis Cooling Considerations
on page 1-8.
