4
ENGLISH
1. Decide on a location for the Gateway.
Put the Gateway near a power source, near your DSL or cable modem or fiber-optic media con-
verter, and in a location where air can circulate freely around it.
2. Power the Gateway.
Connect the power supply to the power jack on the back panel of the Gateway. Then, plug the
power supply into an electrical outlet. Turn on the Power switch.
The
Power
LED should light solid green.
3. Insert the Motorola Netopia
®
CD into your CDROM drive.
The Motorola Netopia
®
Installation Guide Wizard automates several tasks to get you up and
running easily. These tasks include making the cable connections and configuring the Gateway.
Run the Wizard on every computer that will connect to your network.
The Installation Guide Wizard will start automati-
cally and the Welcome screen will appear to step
through the process.
Follow the on-screen instructions to make all of
your connections.
Connections
2