4-10 Administrator’s Handbook
•
If you choose static as the range type, a new menu item,
First Public Address
, becomes visible.
Select
First Public Address
and enter the first exterior IP address in the range you want to assign.
Select
Last Public Address
and enter an IP address at the end of the range.
•
Select
ADD NAT PUBLIC RANGE
and press Return. The range will be added to your list and you will be
returned to the Network Address Translation screen.
Once the public ranges have been assigned, the next step is to bind interior addresses to them. Because these
bindings occur in ordered lists, called
map lists
, you must first define the list, then add mappings to it.
From the Network Address Translation screen select
Add Map List
and press Return.
The Add NAT Map List screen appears.
•
Select
Map List Name
and enter a descriptive name for this map list. A new menu item,
Add Map
,
appears.
•
Select
Add Map
and press Return. The Add NAT Map screen appears.
Add NAT Map List
Map List Name: my_map
Add Map...
Summary of Contents for Netopia Embedded Software
