manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

IP Setup   7-27

An IP address is marked declined when a client to whom the DHCP ser ver offers the address declines the 
address. A client declines an address if it determines that a leased address is already in use by another 
device.

Selecting 

Include

 restores the selected IP address to the address ser ving pool so that the IP address is 

once again eligible to be ser ved to a client.

•

Release

 is displayed if the entr y is currently offered, leased, or reser ved. 

Selecting 

Release

 puts the selected entr y in the available state. You will be presented with a warning 

dialog asking you to confirm the operation since the IP address is in use. There is no mechanism to notify 
the client to whom the address is leased that the lease has been terminated. Thus, the client will continue 
to use the address until the next time it attempts to renew its lease. In the interim, the ser ver may lease 
the same IP address to a different client, thereby creating an address conflict. For this reason, releasing 
an address that is actively being used by a client is generally not recommended.

•

Reserve…

 is displayed if the entr y is available, declined, excluded, leased, offered, or reser ved. 

Reser ving an IP address for a client with a par ticular Ethernet MAC address guarantees that a client with 
the specified MAC address will be offered or leased the specified IP address. Moreover, it prevents the 
specified IP address from being offered or leased to any other client. 

Selecting 

Reserve...

 displays a pop-up dialog box that displays the IP address and editable item in which 

you can enter an Ethernet MAC address. The pop-up dialog box includes 

OK

 and 

CANCEL

 buttons for 

confirming or cancelling the operation. If the IP address is currently offered or leased to, or reser ved for, a 
client, you will be presented with a warning dialog asking you to confirm the operation. Reser ving an IP 
address guarantees that the IP address will only be leased.

The gateway’s Ethernet IP address(es) will be automatically excluded from the address ser ving pool(s) on 
star tup. Entries in the ser ved IP address list corresponding to the gateway’s Ethernet IP address(es) that have 
been automatically excluded on star tup are not selectable.

                              Served IP Addresses

 -IP Address------Type----Expires—-Host Name/Client Identifier-----------------
 ----------------------------------SCROLL UP-----------------------------------
 192.168.1.100
 192.168.1.101
 192.168.1.102   +--------------------------------------+
 192.168.1.103   +--------------------------------------+
 192.168.1.104   |                                      |
 192.168.1.105   | IP Address is 192.168.1.108          |
 192.168.1.106   | MAC Address:  00-00-c5-45-89-ef      |
 192.168.1.107   |                                      |
 192.168.1.108   |          CANCEL       OK             |
 192.168.1.109   |                                      |
 192.168.1.110   |                                      |
 192.168.1.111   +--------------------------------------+
 192.168.1.112    +------------+
 192.168.1.113
 ---------------------------------SCROLL DOWN----------------------------------
 Lease Management...

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

Watchguard AP200 Setup Manual preview
AP200
Brand: Watchguard Pages: 40
B+B SmartWorx UR5i v2 Libratum Start Manual preview
UR5i v2 Libratum
Brand: B+B SmartWorx Pages: 8
B+B SmartWorx ICR-1601 Start Manual preview
ICR-1601
Brand: B+B SmartWorx Pages: 8
PaloAlto Networks PA-5400 Series Quick Start Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 2
Konica Minolta Network Setup Network Setup Manual preview
Network Setup
Brand: Konica Minolta Pages: 38
Western Digital My Net N750 Start Here Manual preview
My Net N750
Brand: Western Digital Pages: 8
Qixiang Technology QR310 Installation And Configuration Quick Manual preview
QR310
Brand: Qixiang Technology Pages: 16
Xenya XS26GS User Manual preview
XS26GS
Brand: Xenya Pages: 189
B+B SmartWorx spectre lte User Manual preview
spectre lte
Brand: B+B SmartWorx Pages: 52
Caen A 1735 Technical Information Manual preview
A 1735
Brand: Caen Pages: 14
Cabletron Systems SmartSwitch 8-slot User'S Reference Manual preview
SmartSwitch 8-slot
Brand: Cabletron Systems Pages: 150
QTech QSW-2900 User Manual preview
QSW-2900
Brand: QTech Pages: 406
Softing TH LINK Installation Manual preview
TH LINK
Brand: Softing Pages: 16
Belkin F5D7230au4P Manual preview
F5D7230au4P
Brand: Belkin Pages: 2
Hirschmann MM2-2FXM3/2TX1 Description And Operating Instructions preview
MM2-2FXM3/2TX1
Brand: Hirschmann Pages: 8
3Com HiPer DSP Getting Started Manual preview
HiPer DSP
Brand: 3Com Pages: 17
Cambium Networks PTP 850E User Manual preview
PTP 850E
Brand: Cambium Networks Pages: 560
Cambium Networks PTP 820C User Manual preview
PTP 820C
Brand: Cambium Networks Pages: 672

Brands by name

Popular brands

Load more brands