manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

Security   10-41

Established connections

The TCP header contains one bit called the ACK bit (or TCP Ack bit). This ACK bit appears only with TCP, not 
UDP. The ACK bit is par t of the TCP mechanism that guarantees the deliver y of data. The ACK bit is set 
whenever one side of a connection has received data from the other side. Only the first TCP packet will not have 
the ACK bit set; once the TCP connection is in place, the remainder of the TCP packets with have the ACK bit 
set.

The ACK bit is helpful for firewall design and reduces the number of potential filter rules. A filter rule could be 
created just allowing incoming TCP packets with the ACK bit set, since these packets had to be originated from 
the local network. 

Example filter set screen

This is an example of the Motorola Netopia

®

 filter set screen:

Filter basics

In the source or destination IP address fields, the IP address that is entered must be the network address of 
the subnet. A host address can be entered, but the applied subnet mask must be 32 bits (255.255.255.255).

The Motorola Netopia® Embedded Software Version 8.7.4 has the ability to compare source and destination 
TCP or UDP por ts. These options are as follows:

Item

What it means

No Compare

Does not compare TCP or UDP por t

Not Equal To

Matches any por t other than what is defined

Less Than

Anything less than the por t defined

                            Change Input Filter 1

         Enabled:                           Yes
         Forward:                           No

         Source IP Address:                 0.0.0.0
         Source IP Address Mask:            0.0.0.0

         Dest. IP Address:                  0.0.0.0
         Dest. IP Address Mask:             0.0.0.0

         Protocol Type:                     TCP
         Source Port Compare...             No Compare
         Source Port ID:                    0
         Dest. Port Compare...              Equal
         Dest. Port ID:                     2000
         Established TCP Conns. Only:       No

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

Paradyne 4300 Installation Instructions Manual preview
4300
Brand: Paradyne Pages: 22
Paradyne 7995-A2-374 Quick Installation Instructions preview
7995-A2-374
Brand: Paradyne Pages: 1
H3C S12500R-2L Installation, Quick Start preview
S12500R-2L
Brand: H3C Pages: 26
APM AQ-500h Specification Sheet preview
AQ-500h
Brand: APM Pages: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Brand: Patton electronics Pages: 23
ADTRAN NetVanta 6355 PoE Installation Manual preview
NetVanta 6355 PoE
Brand: ADTRAN Pages: 46
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Brand: AYRSTONE Pages: 2
IBM System Storage DS3200 Overview preview
System Storage DS3200
Brand: IBM Pages: 2
Eaton SONiX Pm10 Technical Manual preview
SONiX Pm10
Brand: Eaton Pages: 14
National Instruments FieldPoint FP-3000 User Manual preview
FieldPoint FP-3000
Brand: National Instruments Pages: 118
Cabletron Systems SmartSTACK ELS100-24TXM Installation And User Manual preview
SmartSTACK ELS100-24TXM
Brand: Cabletron Systems Pages: 117
General DataComm PacketMate 1000 User Manual preview
PacketMate 1000
Brand: General DataComm Pages: 20
Behringer B-Control Fader BCF2000 Quick Start Manual preview
B-Control Fader BCF2000
Brand: Behringer Pages: 13
rtd IDAN-ID5915 User Manual preview
IDAN-ID5915
Brand: rtd Pages: 28
IMC Networks Wireless Outdoor Bridge XI-1500-IH Quick Installation Manual preview
Wireless Outdoor Bridge XI-1500-IH
Brand: IMC Networks Pages: 13
Rajant BreadCrumb ES1 User Manual preview
BreadCrumb ES1
Brand: Rajant Pages: 93
H3C MSR-20-21 ROUTER Installation Manual preview
MSR-20-21 ROUTER
Brand: H3C Pages: 83
Allied Telesis AR100 series User Manual preview
AR100 series
Brand: Allied Telesis Pages: 128

Brands by name

Popular brands

Load more brands