Instruction Sheet for Headset Adapter Cable NKN6498
3
Disassemble the adapter cable
using two shop rags and two gas-
type pliers. Attach the headset plug onto the adapter bayonet-type
socket so as to stabilize the adapter and protect the bayonet-type
connector from being deformed. Use a shop rag around the headset
plug and another shop rag around the housing (item no. 3) to pro-
tect the cable adapter components from the pliers jaws marks. Grasp
the headset plug with one plier and the housing with the other plier.
Unscrew the socket assembly (item nos. 7 and 8) from the housing
(item no. 3). The pc board assembly (item no. 6) is now accessible.
Reassemble the adapter cable
in the reverse order of disassembly. Make
sure that the pc board is seated into its mating groove in the adapter collar
(item no. 7) to ensure that the wires do not get twisted-up during reassembly.
And, make sure that the adapter cable is attached to the headset plug to pro-
tect the bayonet-type connector from being deformed.
Replacement Parts
Figure 3: Adapter Cable Exploded View
1
2
3
4
5
6
7
8
Exploded View Parts List
Item
No.
Motorola
Part No.
Description
1
3005741Z01
ADAPTER
2
4205370R03
STRAIN
RELIEF
3
1505376U01
HOUSING
4
0505432U01
EYELET
5
4210217A02
TIE WRAP
6
0105955T60
PC BOARD
ASSY.
7
4305368U01
COLLAR
8
2805366U01 CONNECTOR
To order replacement parts, or for war-
ranty information, contact Motorola
Americas Parts Division (APD) at
1-800-422-4210 or 1-847-538-8023.
