3
CLONING PROCEDURE
(CP040/
CP140/CP160/CP180)
1. Turn off source and target radio;
then connect cloning cable to side
connector of each radio.
2. Turn on target radio.
3. Source radio —Simultaneously
press and hold side buttons 1 and
2 (see illustration); then turn on
radio. Both radios produce a
“clone-entry” tone. Display radios
will show
CLONING
(source radio)
and
PROGRAM
(target radio).
4. Release both side buttons of source radio.
The electronic transfer begins and will take
less than one minute. When cloning is
completed, the source radio produces a
“clone-exit” tone and displays
CLN
CMP
. Both
radios reset themselves.
5. Turn off source and target radio; then dis-
connect cloning cable from each radio.
6. Turn on source and target radio for normal
operation.
P
T
T
1
2
92C95-A_Text_EN.fm Page 3 Tuesday, January 27, 2004 3:06 PM
