User Guide: PTP 600 Series
Preparing and connecting cables
phn-0896_012v000
Jul 2010
5-11
Disconnecting the drop cable from an ODU or LPU
NOTE
This procedure contains illustrations of an ODU, but it applies in principle to
both the ODU and the LPU.
To disconnect the drop cable with a gland from a unit (LPU or ODU), proceed as
follows:
Procedure 5-3 Disconnect the drop cable with a gland from a unit (LPU or ODU)
1
Remove the gland back shell.
2
Wiggle the drop cable to release the tension of the gland body.
When the tension in the glad body is released, a gap opens at the point
shown in red in the above photograph.
3
Unscrew the gland body.
4
Use a small screwdriver to depress the RJ45 locking cap
5
Unplug the RJ45.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299