User Guide: PTP 600 Series
Installing a GPS receiver for PTP-SYNC
phn-0896_012v000
Jul 2010
5-47
9
Wrap a layer of PVC tape, starting just below the start of the self-
amalgamating tape and finishing at the GPS housing, overlapping at half
width.
Repeat with a further four layers of PVC tape alternating the start and
finish ends.
Grounding the GPS receiver drop cable
For installations where the GPS receiver module is fitted to a metal tower or mast,
ground bond the GPS receiver drop cable to the tower or mast. To identify the
required grounding points, refer to
Mounting the GPS receiver module on a metal
tower or mast
on page
2-34
.
To ground the cable, follow the procedure described in
Grounding the drop cable
on
page
5-5
.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299