Managing performance
Chapter 7 Operation
phn-0896_012v000
7-52
Jul 2010
Attribute
Meaning
Detailed Counters
Page Refresh
Period
The statistics page refreshes automatically according to the
setting entered here (in seconds).
Using the diagnostics plotter
The diagnostics plotter can trace the following statistics (refer to
Table 7-13
for
definitions):
•
Vector Error
•
Rx Power
•
Tx Power
•
Signal Strength Ratio V/H
•
Link Loss
•
Rx Data Rate
•
Tx Data Rate
•
Aggregate Data Rate
To plot diagnostics, proceed as follows:
Procedure 7-6 Plot diagnostics
1
Select menu option
System,
Diagnostics Plotter
. The Diagnostics Plotter
page is displayed (
Figure 7-19
).
2
Use the Diagnostics Selector drop-down list to select a diagnostic type to
plot.
3
Use the Trace Selection to select traces of the maximum, mean or minimum
values of the diagnostic type. Maximum values are displayed in
red
, mean
values are displayed in
purple
and minimum values are displayed in
blue
.
4
Select
Plot Selected Diagnostic
. The trace is displayed in the graph.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299