manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at 88.208.23.73:8080 and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

4-108   

Motorola RF Switch System Reference Guide

 

5. Refer to the 

Traffic

 field for the following information

:

6. Refer to the 

RF Status 

field for the following information

:

7. Refer to the 

Errors 

field for the following information

:

8. Click 

Refresh 

to update the content of the screen with the latest values.

9. Refer to the 

Status

 field for the current state of the requests made from applet. This field displays error 

messages if something goes wrong in the transaction between the applet and the switch.

Pkts per second

Displays the average total packets per second that cross the selected radio. The 
Rx column displays the average total packets per second received on the selected 
radio. The Tx column displays the average total packets per second sent on the 
selected radio. The number in black represents this statistics for the last 30 
seconds and the number in blue represents this statistics for the last hour.

Throughput

Displays the average throughput in Mbps on the selected radio. The Rx column 
displays the average throughput in Mbps for packets received on the selected 
radio. The Tx column displays the average throughput for packets sent on the 
selected radio. The number in black represents this statistics for the last 30 
seconds and the number in blue represents this statistics for the last hour.

Avg Bit Speed

Displays the average bit speed in Mbps on the selected radio. This includes all 
packets that are sent and received. The number in black represents this statistic 
for the last 30 seconds and the number in blue represents this statistic for the last 
hour.

Non-unicast Pkts

Displays the percentage of the total packets for the selected radio that are non-
unicast packets. Non-unicast packets include broadcast and multicast packets. 
The number in black represents this statistics for the last 30 seconds and the 
number in blue represents this statistics for the last hour.

Avg Station Signal

Displays the average RF signal strength in dBm for all MUs associated with the 
selected radio. The number in black represents this statistics for the last 30 
seconds and the number in blue represents this statistics for the last hour.

Avg Station Noise

Displays the average RF noise for all MUs associated with the selected radio. The 
number in black represents this statistics for the last 30 seconds and the number 
in blue represents this statistics for the last hour.

Avg Station SNR

Displays the average 

Signal to Noise Ratio

 (SNR) for all MUs associated with the 

selected radio. The Signal to Noise Ratio is an indication of overall RF 
performance on your wireless network.

Avg Num of retries

Displays the average number of retries for all MUs associated with the selected 
radio. The number in black represents this statistics for the last 30 seconds and 
the number in blue represents this statistics for the last hour.

% Gave Up Pkts

Displays the percentage of packets the switch gave up on for all MUs associated 
with the selected radio. The number in black represents this statistics for the last 
30 seconds and the number in blue represents this statistics for the last hour.

% of Undecryptable 
Pkts

Displays the percentage of undecryptable packets for all MUs associated with the 
selected radio. The number in black represents this statistics for the last 30 
seconds and the number in blue represents this statistics for the last hour.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

Barksdale 8000 Series Operating Instructions Manual preview
8000 Series
Brand: Barksdale Pages: 6
I-Tech M118 User Manual preview
M118
Brand: I-Tech Pages: 27
3Com 3C17539 Datasheet preview
3C17539
Brand: 3Com Pages: 12
3Com S7906E - Switch Datasheet preview
S7906E - Switch
Brand: 3Com Pages: 8
Kramer VP-727XL User Manual preview
VP-727XL
Brand: Kramer Pages: 61
Cabletron Systems SMALL OFFICE CyberSwitch 150 Manual preview
SMALL OFFICE CyberSwitch 150
Brand: Cabletron Systems Pages: 106
Communica CST-2042 User Manual preview
CST-2042
Brand: Communica Pages: 5
Lucent Technologies LambdaUnite MSS Installation Manual preview
LambdaUnite MSS
Brand: Lucent Technologies Pages: 388
Quintum Tenor AXE1600 Specifications preview
Tenor AXE1600
Brand: Quintum Pages: 2
Eaton Edison Cooper Power Series Installation And Operation Instructions Manual preview
Edison Cooper Power Series
Brand: Eaton Pages: 12
Fairchild FSDH321 Manual preview
FSDH321
Brand: Fairchild Pages: 20
Bridgetek PANL PH44 Quick Start Manual preview
PANL PH44
Brand: Bridgetek Pages: 2
Cabletron Systems SmartSTACK 100 ELS100-16TX Getting Started preview
SmartSTACK 100 ELS100-16TX
Brand: Cabletron Systems Pages: 16
Lakeshore 3f Delta Operation & Maintenance Manual preview
3f Delta
Brand: Lakeshore Pages: 82
NegoRack NR-MSR2701S User Manual preview
NR-MSR2701S
Brand: NegoRack Pages: 41
CoolGear CG-UC31PD4H Product Manual preview
CG-UC31PD4H
Brand: CoolGear Pages: 8
ANTAIRA LMP-2012G-SFP Series Quick Installation Manual preview
LMP-2012G-SFP Series
Brand: ANTAIRA Pages: 2
Zigen ZIG-SW42 User Manual preview
ZIG-SW42
Brand: Zigen Pages: 18

Brands by name

Popular brands

Load more brands