manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at 88.208.23.73:8080 and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

1-22   

Motorola RF Switch Systen Reference

 

WPA

WPA is designed for use with an 802.1X authentication server, which distributes different keys to each user. 
However, it can also be used in a less secure 

pre-shared key 

(PSK) mode, where every user is given the same 

passphrase. 

WPA uses 

Temporal Key Integrity Protocol

 (TKIP), which dynamically changes keys as the system is used. 

When combined with the much larger Initialization Vector, it defeats well-known key recovery attacks on 
WEP. For information on configuring WPA for a WLAN, see 

Configuring WPA/WPA2 using TKIP and CCMP 

on page 4-57

.

WPA2

WPA2 uses a sophisticated key hierarchy that generates new encryption keys each time a MU associates 
with an Access Point. Protocols including 802.1X, EAP and Radius are used for strong authentication. WPA2 
also supports the TKIP and AES-CCMP encryption protocols. For information on configuring WPA for a WLAN, 
see 

Configuring WPA/WPA2 using TKIP and CCMP on page 4-57

.

Keyguard-WEP 

KeyGuard is Motorola’s proprietary dynamic WEP solution. Motorola (upon hearing of the vulnerabilities of 
WEP) developed a non standard method of rotating keys to prevent compromises. Basically, KeyGuard is TKIP 
without the message integrity check. KeyGuard is proprietary to Motorola MUs only. For information on 
configuring KeyGuard for a WLAN, see 

Configuring WEP 128 / KeyGuard on page 4-55

.

1.2.5.2 MU Authentication

The switch uses the following authentication schemes for MU association:

•

Kerberos

•

802.1x EAP

•

MAC ACL

Refer to 

Editing the WLAN Configuration on page 4-25

 for additional information.

Kerberos

Kerberos allows for mutual authentication and end-to-end encryption. All traffic is encrypted and security 
keys are generated on a per-client basis. Keys are never shared or reused, and are automatically distributed 
in a secure manner. For information on configuring Kerberos for a WLAN, see 

Configuring Kerberos on page 4-34

.

802.1x EAP

802.1x EAP is the most secure authentication mechanism for wireless networks and includes 
EAP-TLS, EAP-TTLS and PEAP. The switch is a proxy for Radius packets. An MU does a full 802.11 
authentication and association and begins transferring data frames. The switch realizes the MU needs to 
authenticate with a Radius server and denies any traffic not Radius related. Once Radius completes its 
authentication process, the MU is allowed to send other data traffic. You can use either an onboard Radius 
server or internal Radius Server for authentication. For information on configuring 802.1x EAP for a WLAN, 
see 

Configuring 802.1x EAP on page 4-33

.

MAC ACL

The MAC ACL feature is basically a dynamic MAC ACL where MUs are allowed/denied access to the network 
based on their configuration on the Radius server. The switch allows 802.11 authentication and association, 
then checks with the Radius server to see if the MAC address is allowed on the network. The Radius packet 

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

D-Link xStack User Manual preview
xStack
Brand: D-Link Pages: 357
Key Digital Champion KD-2X1 Operating Instructions Manual preview
Champion KD-2X1
Brand: Key Digital Pages: 12
LEGRAND C2G 29974 Manual preview
C2G 29974
Brand: LEGRAND Pages: 12
Optical Systems Design OSD2154P Operator'S Manual preview
OSD2154P
Brand: Optical Systems Design Pages: 20
WIKA PSM-700 Operating Instructions Manual preview
PSM-700
Brand: WIKA Pages: 8
Little Giant ACS-3 Installation, Operation, Maintenance & Repair Parts preview
ACS-3
Brand: Little Giant Pages: 2
FS IES3110-8TF Quick Start Manual preview
IES3110-8TF
Brand: FS Pages: 33
Dahua PFS3005-5ET-V2 Quick Start Manual preview
PFS3005-5ET-V2
Brand: Dahua Pages: 17
XtendLan MATRIX1608A User Manual preview
MATRIX1608A
Brand: XtendLan Pages: 24
Eaton TM-1-8210 Series Instruction Leaflet preview
TM-1-8210 Series
Brand: Eaton Pages: 3
Datavideo KMU-200 Instruction Manual preview
KMU-200
Brand: Datavideo Pages: 64
rako RMR-VF User Manual preview
RMR-VF
Brand: rako Pages: 5
Gefen HDMI-242 User Manual preview
HDMI-242
Brand: Gefen Pages: 12
Sensor Switch SPODMRA JOT Installation Instructions preview
SPODMRA JOT
Brand: Sensor Switch Pages: 2
ALFAtron MUH88E User Manual preview
MUH88E
Brand: ALFAtron Pages: 45
AEB 725A Assembly & Instruction Manual preview
725A
Brand: AEB Pages: 10
WaveSplitter WST-PIP001 Operation Manual preview
WST-PIP001
Brand: WaveSplitter Pages: 35
Field Controls 46114900 Manual preview
46114900
Brand: Field Controls Pages: 4

Brands by name

Popular brands

Load more brands