manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at 88.208.23.73:8080 and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

7-12   

Motorola RF Switch System Reference Guide

 

5. Click the 

Expand All Items

 button to display the sub-items within each trap category. Use this item to 

display every trap that can be enabled. 

Once expanded, traps can then be enabled by trap category or individually within each trap category.

6. Highlight a specific trap and click the 

Enable

 button to enable this specific trap as an active SNMP trap. 

The items previously disabled (with an "X" to the left) now display with a check to the left of it. 

7. Highlight a specific trap and click the 

Disable

 button to disable the item as an active SNMP trap. 

The items previously enabled (with a check to the left) now display with an "X" to the left of it.

8. Highlight a sub-menu header (such as Redundancy or Update Server) and click the 

Enable all sub-items 

button to enable the item as an active SNMP trap. 

Those sub-items previously disabled (with an "X" to the left) now display with a check to the left of them. 
Once the

 Apply

 button is clicked, the selected items are now active SNMP traps on the system.

9. Highlight a sub-menu header (such as Redundancy or SNMP) and click the 

Disable all 

sub-items button 

to disable the item as an active SNMP trap. 

Those sub-items previously enabled (with a check to the left) now display with an "X" to the left of them. 

10.Click 

Apply

 to save the trap configurations enabled using the Enable or Enable all sub-items options. 

11.Click 

Revert 

to discard any updates and revert back to its last saved configuration.

Mobility 

Displays a list of sub-items (trap options) specific to the Mobility configuration 
option. Select an individual trap within this subsection and click the 

Enable

 button 

to enable this specific trap or highlight the Mobility trap family parent item and click 

Enable all sub-items 

to enable all traps within the Mobility category.

DHCP

Displays a list of sub-items (trap options) specific to the DHCP configuration option. 
Select an individual trap within this subsection and click the 

Enable 

button to 

enable this specific trap or highlight the DHCP trap family parent item and click 

Enable all sub-items

 

to enable all traps within the DHCP category.

Radius

Displays a list of sub-items (trap options) specific to the Radius configuration 
option. Select an individual trap within this subsection and click the 

Enable 

button 

to enable this specific trap or highlight the Radius trap family parent item and click 

Enable all sub-items

 

to enable all traps within the Radius category.

SNMP

Displays a list of sub-items (trap options) specific to the SNMP configuration 
option. Select an individual trap within this subsection and click the 

Enable

 button 

to enable this specific trap or highlight the SNMP trap family parent item and click 

Enable all sub-items

 to enable all traps within the SNMP category.

Diagnostics

Displays a list of sub-items (trap options) specific to the Diagnostics configuration 
option. Select an individual trap within this subsection and click the 

Enable

 button 

to enable this specific trap or highlight the Diagnostics trap family parent item and 
click 

Enable all 

sub-items

 to enable all traps within the Diagnostics category.

Wireless

Displays the list of sub-items (trap options) specific to Wireless configuration. 
These include traps specific to wireless interoperability between the switch and its 
associated devices. Select an individual trap and click the

 Enable 

button to enable 

a specific trap or highlight the Wireless trap family parent item and click 

Enable 

all sub-items

 to enable all traps within the Wireless category.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

vantiva COM3000 Installation Manual preview
COM3000
Brand: vantiva Pages: 58
SMC Networks PF2A7 Series Operation Manual preview
PF2A7 Series
Brand: SMC Networks Pages: 43
Waters Network Systems ES1008-MSC Operating Manual preview
ES1008-MSC
Brand: Waters Network Systems Pages: 16
Black Box SW1046A Manual preview
SW1046A
Brand: Black Box Pages: 28
Soyntec Nexoos 370 Series User Manual preview
Nexoos 370 Series
Brand: Soyntec Pages: 7
Fairchild FPS FSDH0265RN Manual preview
FPS FSDH0265RN
Brand: Fairchild Pages: 20
Hewlett Packard Enterprise FlexFabric 5940 Series Configuration Manual preview
FlexFabric 5940 Series
Brand: Hewlett Packard Enterprise Pages: 123
Pakedge SE-18 Quick Start Manual preview
SE-18
Brand: Pakedge Pages: 12
ADS Technologies USBH-604 Connection Manual preview
USBH-604
Brand: ADS Technologies Pages: 2
S+S HYGRASREG TW-W Operating Instructions, Mounting & Installation preview
HYGRASREG TW-W
Brand: S+S Pages: 16
B&B Electronics 8 PORT SMART SWITCH CE 232D4SS8 User Manual preview
8 PORT SMART SWITCH CE 232D4SS8
Brand: B&B Electronics Pages: 29
C&C TECHNIC Smart view IC-1304-IO User Manual preview
Smart view IC-1304-IO
Brand: C&C TECHNIC Pages: 2
W Box Technologies 0E-8P65W4POE Manual preview
0E-8P65W4POE
Brand: W Box Technologies Pages: 10
Hama 78496 Operating Instructions Manual preview
78496
Brand: Hama Pages: 14
Lindy 38088 Manual preview
38088
Brand: Lindy Pages: 7
Hailink MX44NN00RK User Manual preview
MX44NN00RK
Brand: Hailink Pages: 6
AVCOMM 608FX4 Quick Installation Manual preview
608FX4
Brand: AVCOMM Pages: 2
AMERITRON RCS-12 Instruction Manual preview
RCS-12
Brand: AMERITRON Pages: 16

Brands by name

Popular brands

Load more brands