Switch Management
7-15
3. Refer to the following information for thresholds descriptions, conditions, editable threshold values and
units of measurement.
4. Select a threshold and click the
Edit
button to display a screen wherein threshold settings for the MU,
AP and WLAN can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for the MU,
AP or WLAN. Ensure the value set is realistic, in respect to the number of MUs and APs supporting
WLANs within the switch managed network.
5. Use the
Maximum Number of Packets to Send a Trap
field (at the bottom of the screen) to enter a
value used as the minimum number of data packets required for a trap to be generated for a target event.
Ensure the value is realistic, as setting it to low could generate traps unnecessarily. Refer to
Wireless
Trap Threshold Values on page 7-17
for additional information.
Threshold Name
(Description)
Displays the target metric for the data displayed to the right of the item. It defines
a performance criteria used as a target for trap configuration.
Threshold Conditions
Displays the criteria used for generating a trap for the specific event. The Threshold
conditions appear as greater than, less then or worse then and define a baseline
for trap generation.
Threshold values for:
MU
Displays a threshold value for associated MUs. Use the
Threshold Name
and
Threshold Conditions
as input criteria to define an appropriate Threshold Value
unique to the MUs within the network. For information on specific values, see
Wireless Trap Threshold Values on page 7-17
.
Threshold values for:
AP
Set a threshold value for adopted APs. Use the
Threshold Name
and
Threshold
Conditions
as input criteria to define an appropriate Threshold Value unique to the
APs within the network. For information on specific values, see
Wireless Trap
Threshold Values on page 7-17
.
Threshold values for:
WLAN
Use the
Threshold Name
and
Threshold Conditions
as input criteria to define
an appropriate Threshold Value unique to the switch. For information on specific
values, see
Wireless Trap Threshold Values on page 7-17
.
Threshold values for:
Switch
Use the
Threshold Name
and
Threshold Conditions
as input criteria to define
an appropriate Threshold Value unique to the switch. For information on specific
values, see
Wireless Trap Threshold Values on page 7-17
.
Unit of Threshold
Values
Displays the measurement value used to define whether a threshold value has been
exceeded. Typical values include Mbps, retries and %. For information on specific
values, see
Wireless Trap Threshold Values on page 7-17
.
Summary of Contents for RFS Series
