manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at 88.208.23.73:8080 and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

TOC-3

4.7.10  Voice Statistics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-128

4.8 Viewing Access Port Adoption Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-130

4.8.1  Configuring AP Adoption Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-130
4.8.2  Configuring Layer 3 Access Port Adoption  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-138
4.8.3  Configuring WLAN Assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-138
4.8.4  Configuring WMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-140

4.9 Configuring Access Ports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-142

4.9.1  Viewing Adopted Access Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-142
4.9.2  Viewing Unadopted Access Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-144
4.9.3  Access Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-146
4.9.4  Viewing Sensor Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-149
4.9.5  Configuring Secure WiSPe  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-151
4.9.6  Configuring Adaptive AP Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-152

4.10 Multiple Spanning Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-156

4.10.1  Configuring a Bridge  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-157
4.10.2  Viewing and Configuring Bridge Instance Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-159
4.10.3  Configuring a Port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-161
4.10.4  Viewing and Configuring Port Instance Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-165

4.11 IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-167

4.11.1  IGMP Snoop Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-167
4.11.2  IGMP Snoop Querier Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-168

4.12 Wired Hotspot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-170

4.12.1  Wired Hotspot Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-170

Chapter 5. Switch Services

5.1 Displaying the Services Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.2 DHCP Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

5.2.1  Configuring the Switch DHCP Server  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
5.2.2  Viewing the Attributes of Existing Host Pools  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
5.2.3  Configuring Excluded IP Address Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11
5.2.4  Configuring the DHCP Server Relay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13
5.2.5  Viewing DDNS Bindings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
5.2.6  Viewing DHCP Bindings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
5.2.7  Reviewing DHCP Dynamic Bindings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
5.2.8  Configuring the DHCP User Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
5.2.9  Configuring DHCP Pool Class. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20

5.3 Configuring Secure NTP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

5.3.1  Defining the SNTP Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
5.3.2  Configuring Symmetric Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
5.3.3  Defining a NTP Neighbor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
5.3.4  Adding an NTP Neighbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
5.3.5  Viewing NTP Associations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
5.3.6  Viewing NTP Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32

5.4 Configuring Switch Redundancy & Clustering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33

5.4.1  Configuring Redundancy Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
5.4.2  Reviewing Redundancy Status  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38
5.4.3  Configuring Redundancy Group Membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41
5.4.4  Redundancy Group License Aggregation Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44
5.4.5  Managing Clustering Using the Web UI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

N-Tron 900 Installation & User Manual preview
900
Brand: N-Tron Pages: 18
Datavideo SE-3000 Instruction Manual preview
SE-3000
Brand: Datavideo Pages: 58
Jabra Link 950 USB-A How Do preview
Link 950 USB-A
Brand: Jabra Pages: 4
Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES Datasheet preview
LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES
Brand: Jabra Pages: 2
N-Tron 608MFX-ST Specifications preview
608MFX-ST
Brand: N-Tron Pages: 2
Movie Vision VCS-3 Installation And User Manual preview
VCS-3
Brand: Movie Vision Pages: 2
SMC Networks SMC8724-10BT Technical Specifications preview
SMC8724-10BT
Brand: SMC Networks Pages: 2
Omega Engineering PSW32 SERIES User Manual preview
PSW32 SERIES
Brand: Omega Engineering Pages: 8
NETGEAR ProSafe GS104 Installation Manual preview
ProSafe GS104
Brand: NETGEAR Pages: 8
Erbe 20186-007 Manual preview
20186-007
Brand: Erbe Pages: 118
I/O Interconnect SV142P1 User Manual preview
SV142P1
Brand: I/O Interconnect Pages: 27
Kramer VP-311DVI User Manual preview
VP-311DVI
Brand: Kramer Pages: 17
UniFi USW-Flex-Mini Quick Start Manual preview
USW-Flex-Mini
Brand: UniFi Pages: 8
WAGO 852-1102 Manual preview
852-1102
Brand: WAGO Pages: 36
Lantech IPES-5222T Series User Manual preview
IPES-5222T Series
Brand: Lantech Pages: 30
EtherWAN EX17162A Installation Manual preview
EX17162A
Brand: EtherWAN Pages: 2
EtherWAN EX19164A Installation Manual preview
EX19164A
Brand: EtherWAN Pages: 2
Accton Technology EtherHub-24s Quick Installation Manual preview
EtherHub-24s
Brand: Accton Technology Pages: 7

Brands by name

Popular brands

Load more brands